Sterilisatie in plaats van desinfectie van containers en instrumenten in het labo. Een hetelucht sterilisator beschermt en redt levens in de medische wereld.

De hetelucht sterilisator S is in overeenstemming met alle relevante standaarden.


Our steriliser S complies with all relevant standards and regulations for medical products and guarantees reliable programme sequences, irrespective of the load and chamber volume. Especially due to the SetpointWAIT function the validation of a Memmert hot air steriliser is possible anytime. Combined with the user-ID function the optional process-controlled, electromagnetic door lock of appliances with model variant TwinDISPLAY is the icing on the cake in terms of safety in the laboratory.
• Temperature range up to +250 °C
• 8 model sizes (30l to 750l)
• 2 model variants: SingleDISPLAY and TwinDISPLAY
• Natural convection or forced air circulation N/F

Disinfection of appliances and instruments is not sufficient in medicine and research. Only sterilisation provides sufficient protection. In the Memmert hot-air steriliser, the SetpointWAIT function ensures that the programme is only continued when the setpoint temperature has been reached.

Precisely maintaining the sterilisation time and thus completely killing off even highly resistant microorganisms is therefore guaranteed at all times, irrespective of the sterilisation load and chamber volume.

This feature can also be used with additional, freely positionable Pt100 temperature sensors.In this case, sterilisation only begins when the setpoint temperature has been reached at all measurement points – that is, in the load.

For the special application of depyrogenisation, the hot-air steriliser S is absolutely ideal.

Roestvrij staal - een sterilisator voor (bijna) altijd...

65 years of permanent development work, as well as numerous amounts of feedback from practical experience, are embodied in each Memmert hot-air steriliser:
• Almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing
• Heating concept adapted to the specific product for a precise and homogenous temperature control independent of chamber volume and load
• A wide range of options for programming and documentation using interfaces, integrated data logger and AtmoCONTROL software
• Three-year guarantee for appliances except wear and tear parts
• The temperature values of all sterilisers are measured according to DIN 12880: 2007-05

 

 

Download brochure ovens Memmert

Natuurlijke luchtcirculatie – Single display

De Memmert universele oven SN is geschikt voor laboratoria, ziekenhuizen en de voedselindustrie. De SN Memmert sterilisatoren hebben een heldere TFT display. De toestellen zijn eenvoudig in te stellen en te hanteren. Monitoren is mogelijk door middel van de optionele AtmoCONTROL software. Daarnaast biedt Voor ‘t Labo de mogelijkheid om klant specifieke opties in te bouwen. De Memmert SN sterilisatoren zijn allemaal voorzien van ethernetaansluiting en natuurlijke luchtcirculatie.

Standaard sterilisator

The indispensable safety feature for this hot air steriliser: Setpoint Wait. This means that the programme for sterilisation only starts when the set temperature has been reached. This feature can also be used with freely positionable Pt100 temperature sensors. Here the sterilisation time only begins when the set temperature has been reached at all measurement points, and reliable sterilisation is guaranteed at all times.

On this page, you can find all the essential technical data on our hot air steriliser. Our customer relations team will be pleased to help if you want further information. If you should require a customised special solution, please contact our technical specialists at myAtmoSAFE(at)memmert.com.

Ventilatie & Controle

• natural convection
• adjustment of pre-heated fresh air admixture by air flap control in 10 % steps
• vent connection with restrictor flap
• adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
• self-diagnostics for fault analysis
• 1 Pt100 sensor DIN class A in 4-wire-circuit
• digital timer adjustable from 1 minute to 99 days
• parameters adjustable on ControlCOCKPIT: temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime
• SetpointWAIT function - the process time does not start until the set temperature is reached
• AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (90-days test version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).
• Setting of languages on ControlCOCKPIT: German/English/Spanish/French
• resolution of display for setpoint values 0.1°C up to 99.9°C, 0.5°C from 100°C and for actual values 0.1°C (LED)
• calibration facility directly at ControlCOCKPIT for three freely selectable temperature values
• programme stored in case of power failure
• incl. works calibration certificate for +160°C

Overtemperatuur bescherming (dubbel)

• adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12 880 to switch off the heating approx. 20°C above nominal temperature.

Te verkrijgen modellen

SN30: download brochure
SN55: download brochure
SN75: download brochure
SN110: download brochure
SN160: download brochure
SN260: download brochure
SN450: download brochure
SN750: download brochure

Contacteer ons voor vragen over mogelijk opties en accesoires

 

Offerte aanvragen

Indien u graag de huidige prijs ontvangt van één of meerdere artikels, aarzel dan niet om hier geheel vrijblijvend een offerte aan te vragen.

Hou me op de hoogte van vernieuwingen

Ontvang onze verse updates en promoties elke 2 maanden in uw mailbox. Mis geen nieuws of aantrekkelijke aanbieding en schrijf u hier in.

Onze merken

Web design en development by Lavagraphics